Find what’s right for you.

As your genuine FISHER dealer in Langley, we want to ensure that you get the snow and ice equipment that’s right for you. Contact us today and we can help!

HDX™

Straight Blade Snowplow

featured-image-product-info

HDX™

Straight Blade Snowplow

Built for the business of plowing in Langley, the FISHER® HDX™ snowplow will stand up to the toughest commercial applications. This stainless steel, trip-edge straight blade snowplow is designed for 34 and 1 ton four wheel drive pickup trucks, as well as most skid steer loaders.

Close

Thank you for reaching out.

We'll be in touch with you shortly.

Oops! Something went wrong.

An error was encountered when submitting the form.
Please try again later.

This field is required.
This field is required.
This field is required.
This field is required.
This field is required.
This field is required.
This field is required.
This field is required.
This field is required.
This field is required.
This field is required.
This field is required.

Features

INTENSIFIRE™ Headlamps

Available in both LED and Dual-Halogen models, INTENSIFIRE™ headlamps are engineered and tested for maximum light output, performance and durability to keep you ahead of the next storm.

Plow Blade Construction

Available in 8' and 9' widths, the 29" tall HDX™ snow plow blade is made from corrosion-resistant stainless steel that performs as good as it looks. A standard high-carbon steel cutting edge provides increased wear resistance.

Structural Reinforcement

The HDX™ snowplow is constructed with a total of eight vertical ribs welded into a rigid framework. The two inner ribs and base angle have additional reinforcement which provides increased structural support when attacking winter's worst.

Adjustable Attack Angle

The HDX™ snowplow features an adjustable attack angle that allows you to customize the blades angle of attack based on plowing surfaces, weather conditions or operator preference. Its boxed-in quadrant design features three attack-angle holes for easy adjustment.* - Choose 55 degrees for gravel or unpaved surfaces, or for scooping deep, heavy snow. - Choose the 75-degree angle for asphalt or paved surfaces, and for scraping up ice and hard packed snow. - Choose 65 degrees for general plowing conditions. *Attack angle adjustment may be limited on certain vehicles due to varying vehicle heights. Refer to your snowplow Owners Manual or FISHER® eMatch system for more details.

Articulating A-Frame

With an articulating A-Frame*, the HDX™ snow plow pivots from side to side allowing the blade to follow the contours of the plowing surface for a cleaner scrape and improved cutting edge wear. The system is built on a heavy-duty steel pivot beam for superior strength, and features a 1" diameter pivot bolt for rugged reliability. A stabilizing leaf spring helps keep the mounting points level with the plow for easy drive-in alignment on uneven surfaces. *Articulating A-Frame not applicable to skid-steer attachments.

Reliable Hydraulics

We produce our own hydraulic system to ensure the highest standards of performance, quality and reliability, giving you a plow that is fast, responsive and built to last. All critical hydraulic components are fully enclosed for protection from the elements.

Trip Protection

Our industry-leading trip-edge design protects you and your equipment when encountering hidden obstacles. For improved efficiency and less cleanup, only the bottom edge trips, keeping the blade upright and plowed snow in front of the blade. The FISHER® trip edge uses compression-type springs that never require adjustment and will not wear out like extension springs.

HDX for Skid-Steers

The FISHER® HDX™ snow plow is also available with skid-steer mounting options.

Minute Mount® 2 Snowplow Mounting System

The reliable, mechanical attachment design of the Minute Mount® 2 snowplow mounting system allows for easy hook-up with no tools required and no electrical switches to fail and leave you struggling out in the cold.

Chain Lift Design

The FISHER® chain lift design offers a wide range of performance and reliability advantages over a direct lift system. Clean Scraping The chain lift design allows the blade to continuously float while plowing, enabling it to freely follow the contours of the plowing surface for a cleaner scrape. Higher Stacking With a chain lift you can stack snow higher because the plow's movement is not restricted by the length of the ram stroke like on cylinder lift systems. Reliability With the simple mechanical chain lift design, there are fewer hydraulic and electrical components to worry about, so you can count on long life dependability. Easy Recovery In the rare event of a hydraulic failure, you can push the snow plow up into a snowbank and short chain it to the specially designed bracket for safe transport back to the shop.

FLEET FLEX Electrical System

With the FISHER® FLEET FLEX Electrical System, you have true fleet interchangeability. Unlike other manufacturers who require a different control system for different plows, the FISHER FLEET FLEX system lets you operate the following FISHER Minute Mount® 2 plows on any truck at any time with the same Fish-Stik® hand-held or joystick control.

SECURITY GUARD™ Anti-Theft System

The exclusive SECURITY GUARD™ Anti-Theft System is a safe and secure way to electronically lock your snow plow whenever it is detached from your truck. Unlike physical locks that can easily be cut or removed, the system provides a deterrent against theft by allowing you to electronically lock the snow plow's hydraulic functions, rendering your plow inoperable to unauthorized users.

Universal Control Options

Choose between the ergonomic Fish-Stik® hand-held control or the dash-mounted joystick control based on your preference. Both feature automatic shutoff, backlit buttons for night operation and LED lights, which indicate "power" and "float" mode. Additional features include programmable "soft-stop," "one-touch" float, built-in SECURITY GUARD™ Anti-Theft System, and plug-in connector for easy removal.

Isolation Module

An underhood module transfers lights from vehicle to plow automatically and improves system reliability by using plug 'n play, sealed electrical connections that comply with OEM requirements. Isolating the plow's electrical system from the vehicle's prevents the potential of electrical system damage in the event of a shorted circuit.

Specifications

View Metric View Standard
8' 9'
Blade Width 8' 2.44 m 9' 2.74 m
Blade Height 29" (Blade height for 55° attack angle)
28.5" (Blade height for 65° attack angle)
27.0" (Blade height for 75° attack angle)
73.66 cm (Blade height for 55° attack angle)
72.39 cm (Blade height for 65° attack angle)
68.58 cm (Blade height for 75° attack angle)
29" (Blade height for 55° attack angle)
28.5" (Blade height for 65° attack angle)
27.0" (Blade height for 75° attack angle)
73.66 cm (Blade height for 55° attack angle)
72.39 cm (Blade height for 65° attack angle)
68.58 cm (Blade height for 75° attack angle)
Blade Gauge 14 1.90 mm 14 1.90 mm
Trip Springs 4 4 4 4
Ribs 8 8 8 8
Lift Cylinder 1½" x 10" 3.81 cm x 25.40 cm 1½" x 10" 3.81 cm x 25.40 cm
Angling Rams 1½" x 12" 3.81 cm x 30.48 cm 1½" x 12" 3.81 cm x 30.48 cm
Plowing Width (full angle) 7' 2" 2.19 m 8' 1" 2.46 m
Approx. Weight
(Without vehicle mount)
902 lb 409 kg 861 lb 391 kg
Wear Shoes Optional Optional Optional Optional
Cutting Edge 1/2" x 6" steel 1.27 cm x 15.24 cm 1/2" x 6" steel 1.27 cm x 15.24 cm
Mount Type Minute Mount® 2 Minute Mount® 2 Minute Mount® 2 Minute Mount® 2
About Us
Safe Spreader Mounting
Find Us

WORK TRUCK WEST

Phone: 604-855-5101

27050 Gloucester Way Langley, BC V4W 3Y5 Canada
featured-content-map
Hours of Operation
Monday
8:00 AM - 5:00 PM
Tuesday
8:00 AM - 5:00 PM
Wednesday
8:00 AM - 5:00 PM
Thursday
8:00 AM - 5:00 PM
Friday
8:00 AM - 5:00 PM